The MXR Ten Band EQ lets you tune your bass or guitar rig in seconds, and it’s been upgraded with noise-reduction circuitry, true bypass switching, a lightweight aluminum housing, brighter LEDs, and a second output.
M108S TEN BAND EQ
• Run a cable from your guitar to
the M108S’s INPUT jack and run
another cable from the M108S’s
OUTPUT 1 jack to your amplifier.
Optional: Connect a separate
signal chain from the OUTPUT 2
jack to a second amplifier.
• Set all sliders to their 0dB
position and depress the
footswitch to turn the pedal on.
• Move the VOLUME slider up to
increase overall effect volume or
down to decrease it.
• Move the GAIN slider up to
increase gain or down to
• Move PARAGRAPHIC sliders
up to boost or down to cut
associated frequency by up
The Ten Band EQ is powered by
an 18-volt AC adapter such as the
included Dunlop ECB004 or
the DC Brick™
The MXR Ten Band Graphic EQ gives players
huge amounts of tone shaping and level control
in a bullet-proof enclosure. This pedal has
been upgraded with noise-reduction circuitry,
true bypass switching, a lightweight aluminum
housing, and a second output so you can run two
separate signal chains. With ten carefully chosen
frequencies and both input and output level
controls, the Ten Band EQ will let you tune your
bass or guitar rig to any room in seconds.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.